; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/

[Actions]
requiredWinstVersion >= "4.11.2.6"

DefVar $MsiIdOld32$
DefVar $IniFile32$
DefVar $MsiIdOld64$
DefVar $IniFile64$
DefVar $IniCfgFile$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $OLD_VERSION$
DefVar $OLD_CREATOR_TAG$
DefVar $OLD_RELEASE$

DefVar 	$InstallDir$
DefVar 	$ProgExe$

Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")

Set $LogDir$ = "%SystemDrive%\tmp"

; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
; and adds the following variables:
;   from builder-product.cfg :  all variables definded by attribute WINST[index]
;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
;   auto generated winst-variables
;         $IconFile$: path to product picture
;
@@BUILDER_VARIABLES@@

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts, 
; no white space use '-' as a seperator
Set $MinimumSpace$    = "150 MB"
; the path were we find the product after the installation
Set $InstallDir32$      = "%ProgramFiles32Dir%\Nitro\Reader 5"
Set $InstallDir64$      = "%ProgramFiles64Dir%\Nitro\Reader 5"
; ----------------------------------------------------------------

Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini"

if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $NAME$
	
	if FileExists("%ScriptPath%\delsub3264.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub3264.ins"
	endif
	
	comment "installing"

	if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
		Message "Installing " + $ProductId$ + " "+ $VERSION$ + "-" + $CREATOR_TAG$ + $RELEASE$ + " 32 Bit..."
		comment "Start setup program"
		ChangeDirectory "%SCRIPTPATH%"
		DosInAnIcon_extract_32
		Sub_check_exitcode
		Winbatch_install_32
		Sub_check_exitcode
		
		comment create associations
		Set $InstallDir$ = $InstallDir32$
		Set $ProgExe$ = $Prog32$
		DosInAnIcon_install winst /Sysnative
		
		comment "Copy files"
		Files_install_32 /32Bit
		comment "Patch Registry"
		Registry_cleanup /32bit /AllNTUserdats
		Registry_install /32Bit
		comment "Create shortcuts"
		LinkFolder_install
	endif

	if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
		Message "Installing " + $ProductId$ + " " + $VERSION$ + "-" + $CREATOR_TAG$ + $RELEASE$ + " 64 Bit..."
		comment "Start setup program"
		ChangeDirectory "%SCRIPTPATH%"
		DosInAnIcon_extract_64
		Sub_check_exitcode
		Winbatch_install_64
		Sub_check_exitcode
		
		comment create associations
		Set $InstallDir$ = $InstallDir32$
		Set $ProgExe$ = $Prog32$
		DosInAnIcon_install winst /Sysnative
		
		comment "Copy files"
		Files_install_64 /64Bit
		comment "Patch Registry"
		Registry_cleanup /32bit /AllNTUserdats
		Registry_install /32Bit
;		Registry_install /64Bit
		comment "Create shortcuts"
		LinkFolder_install
	endif
	
endif

[DosInAnIcon_install]
@echo off
If exist "%System%\defaultassociations.xml" (copy "%System%\defaultassociations.xml" "$LogDir$") ELSE (copy "%ScriptPath%\defaultassociations.xml" "$LogDir$")

rem Handling for X86 installation directory since Windows Vista
SET InstallDir=$InstallDir$
for /f "tokens=1-4 delims=\" %%a in ("$InstallDir$") do (
set a=%%a
set b=%%b
set c=%%c
set d=%%d
)
IF "%b%" == "Program Files (x86)" SET InstallDir=%a%^\Program Files ^^(x86^^)^\%c%^\%d%

SET Prog=$ProgExe$
SET Prog=%Prog:~0,-4%
SET SC=HKLM\Software\Classes
SET Extn=.fdf-filetype.ico .pdf-filetype.ico

FOR %%j IN (%Extn%) DO (

	FOR /F "tokens=1,2 delims=-" %%A IN ("%%j") DO (
		REG ADD %SC%\%%A /VE /D "NitroPDFReader%%A" /F
		REG ADD %SC%\NitroPDFReader%%A /VE /D "%%A NitroPDFReader" /F
		REG ADD %SC%\NitroPDFReader%%A\DefaultIcon /VE /D "$InstallDir$\%%B" /F
		REG ADD %SC%\NitroPDFReader%%A\shell\open\command /VE /D "\"%InstallDir%\%Prog%.exe\" \"%%1\"" /F
		copy "$LogDir$\defaultassociations.xml" "$LogDir$\defaultassociations.xml.old"
		xml ed -d /DefaultAssociations/Association[@Identifier='%%A'] "$LogDir$\defaultassociations.xml.old"> "$LogDir$\defaultassociations.xml"
		copy "$LogDir$\defaultassociations.xml" "$LogDir$\defaultassociations.xml.old"
		xml ed -s /DefaultAssociations -t elem -n Association_new -v "" -i /DefaultAssociations/Association_new -t attr -n Identifier -v %%A -i /DefaultAssociations/Association_new -t attr -n ProgId -v NitroPDFReader.Document.3 -i /DefaultAssociations/Association_new -t attr -n ApplicationName -v "Nitro Reader 3" -r "/DefaultAssociations/Association_new" -v Association "$LogDir$\defaultassociations.xml.old"> "$LogDir$\defaultassociations.xml"
  	)
)

rem Set Default Associations for Windows 8
move "$LogDir$\defaultassociations.xml" "%System%"
REG ADD HKLM\Software\Policies\Microsoft\Windows\System /V DefaultAssociationsConfiguration /D "%System%\defaultassociations.xml" /F

[DosInAnIcon_extract_32]
copy /Y "$Install32Exe$" "$LogDir$\nitro-32.exe"
"$LogDir$\nitro-32.exe" /EXTRACTMSI:$LogDir$\nitro-32.msi

[Winbatch_install_32]
msiexec /i "$LogDir$\nitro-32.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=1 REBOOT=ReallySuppress

[Files_install_32]
; copy the ini file to the InstallDir
copy "$IniCfgFile$" "$InstallDir32$"

; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$"

[DosInAnIcon_extract_64]
copy /Y "$Install64Exe$" "$LogDir$\nitro-64.exe"
"$LogDir$\nitro-64.exe" /EXTRACTMSI:$LogDir$\nitro-64.msi

[Winbatch_install_64]
msiexec /i "$LogDir$\nitro-64.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=1 REBOOT=ReallySuppress

[Files_install_64]
; copy the ini file to the InstallDir
copy "$IniCfgFile$" "$InstallDir64$"

; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$"

[Registry_cleanup]
openkey [HKEY_CURRENT_USER\SOFTWARE\Nitro\Reader\3.0\settings\Preferences\kLearningCenter]
DeleteVar "kLCShowAtStartup"

openkey [HKEY_CURRENT_USER\Software\Nitro\Reader\3.0\settings\Preferences\kPreferences]
DeleteVar "kPrefInterfaceShowDoMoreWithProButton"
DeleteVar "kPrefInterfaceShowInfoBarIfDocScanned"
DeleteVar "kPrefUpdateNextCheckControl"

[Registry_install]
; Example of setting some values of an registry key:
;
openkey [HKEY_LOCAL_MACHINE\SOFTWARE\Nitro\Reader\3.0\settings\Preferences\kLearningCenter]
set "kLCShowAtStartup" = "/b 0"

openkey [HKEY_LOCAL_MACHINE\Software\Nitro\Reader\3.0\settings\Preferences\kPreferences]
set "kPrefInterfaceShowDoMoreWithProButton" = "/b 0"
set "kPrefInterfaceShowInfoBarIfDocScanned" = "/b 0"
set "kPrefUpdateNextCheckControl" = "/i $ExpireDateInSeconds$"

; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd


[LinkFolder_install]
set_basefolder common_desktopdirectory
set_subfolder ""
delete_element "Nitro Reader"

; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
; 	name: $ProductId$
; 	target: <path to the program>
; 	parameters:
; 	working_dir: $InstallDir$
; 	icon_file:
; 	icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
; 	name: $ProductId$
; 	target: <path to the program>
; 	parameters: <some_param>
; 	working_dir: $InstallDir$
; 	icon_file: <path to icon file>
; 	icon_index: 2
; end_link

[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif